How to use: 1. The temperature of the machine is better to be set at about 230 degrees. 2. Add the material to the hopper and slowly extrude it until the die appears. 3. Then stop the machine for 15-30 minutes so that the material can fully foam and fill the barrel. 4. Then turn on the extrusion. 5. The discharged material can be reused many times after being crushed according to the degree of cleanliness. ※This process can be repeated 1-2 times according to the cleaning situation. For example, the material can be left in the machine when the machine is turned off, and it will be out when the machine is turned on next time. Food certification: Complies with EU directives for indirect food contact. Storage: The cleaning agent should be stored in a closed warehouse away from sunlight, but it is recommended to use it within 12 months from the production date to obtain better results. Professional screw cleaner service first

How to use: 1. The temperature of the machine is better to be set at about 230 degrees. 2. Add the material to the hopper and slowly extrude it until the die appears. 3. Then stop the machine for 15-30 minutes so that the material can fully foam and fill the barrel. 4. Then turn on the extrusion. 5. The discharged material can be reused many times after being crushed according to the degree of cleanliness. ※This process can be repeated 1-2 times according to the cleaning situation. For example, the material can be left in the machine when the machine is turned off, and it will be out when the machine is turned on next time. Food certification: Complies with EU directives for indirect food contact. Storage: The cleaning agent should be stored in a closed warehouse away from sunlight, but it is recommended to use it within 12 months from the production date to obtain better results. Professional screw cleaner service first